Home » All Products

All Products

Clearance Sale!

GPIO Extender Cable for Raspberry Pi Model A/B - 26pin 12" long

Give your Pi some reach with this GPIO extender cable, which has two matching connectors on the end of a 12" (300mm) long gray cable. Plug one end into your Pi and the other end will have a boxed male header you can plug in a Pi Plate that is expecting to go onto a Pi. This cable is not compatible with the Raspberry Pi Model B+.


Base Price: $4.95
GPIO Ribbon Cable for Raspberry Pi

That new Raspberry Pi computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails. If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 20cm long and has 40 socket & wire sets.


Base Price: $4.95
Gertboard

Are you looking to expand your horizons and start controlling the physical world around you with your Raspberry Pi?  If so, the Gertboard is for you! Yu can detect and output analogue voltages, drive motors, detect switch presses, illuminate LEDs and drive relays. Jumper cables allow you to hook up different parts of the circuit in any different ways, allowing total flexibility all controlled by your Raspberry Pi.


Base Price: $29.95

FLIRC

Limited Edition KODI Case for the Raspberry Pi 4 by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
FLIRC Case for the Raspberry Pi 4

ETA: Mid September 2019.


Base Price: $34.95
FLIRC USB IR Receiver v2

The FLIRC Universal Infrared Remote Control Receiver lets you use any remote control to control any program on any device that accepts a USB keyboard. It's perfect for your Raspberry Pi, FireTV, Android Media Centre or PC/MAC HTPC. It works perfectly with the Logitech Universal Remote, or any remote you have lying around the house.


Base Price: $39.95
Limited Edition KODI Case by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
FLIRC USB IR Receiver v1

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion. Flirc learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup- pairing individual remote buttons with 'Media Centre Buttons' and you're done.  


Base Price: $29.95
FLIRC v2 Case for the Raspberry Pi 3+ (also suits Raspberry Pi 2 and B+)

The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software.


Base Price: $29.95
FLIRC+Remote Bundle

The FLIRC will work with any IR remote control, so if you have an old one lying around the house, you need only buy a FLIRC. However, if you would like a brand new Remote Control with all the buttons you expect to control a Media Centre, this is the bundle for you.


Base Price: $49.90
Remote Control for FLIRC

The FLIRC will work with any IR Remote Control, so if you have an old one lying around the house, you can use it. Otherwise, These remote controls have all the buttons you will need to control your favorite media center from the comfort of the couch.


Base Price: $9.95
FLIRC USB IR Receiver

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion. Flirc learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup- pairing individual remote buttons with 'Media Centre Buttons' and you're done.  


Base Price: $29.95

Flight Aware

FlightAware PiAware Flight Tracker Package

This kit has everything you'll need to build your own FlightAware PiAware ADS-B Ground Station.


Base Price: $143.75
SMA Male to N Type Male Pigtail Cable

Connect your 5dBi antenna to the Flightaware Pro Stick using this SMA to N Type Pigtail.


Base Price: $5.95
FlightAware ADS-B 1090MHz Band-pass SMA Filter

The FlightAware SMA (female to male) 1090MHz Mode S filter is designed to reduce interference and significantly improve the valid mesage rate of ADS-B/Mode S receivers. It passes range 980MHz - 1150MHz. Impedance is 50ohms and insertion loss is <2.5dB.


Base Price: $34.95
FlightAware 5dBi 66cm/26 inch 1090MHz Antenna

5dBi 66cm (26") High performance, omni directional antenna for receiving 1090MHz mode S and ADS-B data from aircraft.


Base Price: $99.95
FlightAware Pro Stick Plus Blue

FlightAware has revolutionized the world of USB SDR ADS-B Receivers with the FlightAware Pro Stick and Pro Stick Plus, high-performance USB R820T2 software defined radios (SDR) with a built-in RF amp for maximum ADS-B/MLAT performance. The Pro Stick Plus adds a built-in 1090 MHz bandpass filter for increased performance and range of reception in areas with moderate RF noise as is typically experienced in most urban areas.


Base Price: $44.95

Raspberry Pi 4

Raspberry Pi 4 Media Centre Kit

This kit has everything you need to turn your TV into a smart TV. With inbuilt WiFi and Bluetooth and pre-loaded KODI Media Centre software, you'll be playing your movies in the lounge room in no time.


Base Price: $172.75
Limited Edition KODI Case for the Raspberry Pi 4 by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
FLIRC Raspberry Pi 4 Starter Kit

Get started with a brand new 4GB Raspberry Pi 4 with this FLIRC based starter kit.


Base Price: $164.95
microHDMI to HDMI Cable for Raspberry Pi 4 (2 meter)

This is a 2 meter long microHDMI to HDMI cable that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.


Base Price: $9.95
FLIRC Case for the Raspberry Pi 4

ETA: Mid September 2019.


Base Price: $34.95
Raspberry Pi 4 Official Power Supply

This is a 5 volt, 3 Amp power supply for the Raspberry Pi 4 with an integrated cable and USB-C connector.


Base Price: $19.95
Raspberry Pi 4 Model B 4GB RAM

Preorder your 4GB Raspberry Pi 4 now and reserve your place in the queue. (Yes, you can order more than one; but no, we do not have a delivery date yet.)


Base Price: $94.95

Raspberry Pi 3 Starter Kits

Raspberry Pi 3 B+ RetroPi Emulation Station Kit

This kit has everything you need to play your favourite retro games on the Raspberry Pi. It comes with a Pi, case, power supply, a HDMI cable and retro controllers.


Base Price: $128.70
Raspberry Pi 3 B+ Media Centre Kit

This kit has everything you need to turn your TV into a smart TV. With inbuilt WiFi and Bluetooth and pre-loaded KODI Media Centre software, you'll be playing your movies in the lounge room in no time.


Base Price: $124.75
Raspberry Pi 3 B+ Starter Kit

This kit has everything you need to start working with your first Raspberry Pi. It comes with the NOOBs OS Loader pre-loaded so you can choose from a selection of the Raspberry Pi's most popular operating systems.


Base Price: $109.95
Raspberry Pi 3 Model B+

The Raspberry Pi 3 Model B+ (Released March, 2018) has a quad-core 64-bit 1.4GHz Processor, 1GB Ram and onboard Dual-band 802.11ac wireless LAN and Bluetooth 4.2 (including BLE). This edition allows for PXE network and USB mass-storage booting and has a Gigabit Ethernet Network Interface.


Base Price: $54.95

Raspberry Pi 2 Starter Kits

Raspberry Pi Zero Components, Accessories and Boards

Official Raspberry Pi Zero W Case

Keep your Raspberry Pi Zero W / Pi Zero safe in this sleek official case. We expect this item to be in stock on the 26th of March.


Base Price: $9.95
MiniHDMI to HDMI Adapter for the Pi Zero / Pi Zero W

This adapter plugs into the mini HDMI port on your Raspberry Pi Zero W or Pi Zero and allows you to plug a standard HDMI cable in. It is necessary for connecting a HDMI display to your Raspberry Pi Zero W.


Base Price: $4.95
microUSB to USB adapter for the Raspberry Pi Zero

The microUSB to USB Adapter cable allows you to connect a USB device or USB Hub to your Raspberry Pi Zero / Zero W.


Base Price: $4.95
Raspberry Pi Official Power Supply

This is the official 240v Power Supply for the Raspberry Pi 3. It has an output capacity of 2,500mA, and an integrated 1.5 meter cable with micro-USB plug. It comes with International plugs and has enough output for all models of the Raspberry Pi.


Base Price: $22.95

 

Raspberry Pi System Boards

Raspberry Pi 3 Model B+

The Raspberry Pi 3 Model B+ (Released March, 2018) has a quad-core 64-bit 1.4GHz Processor, 1GB Ram and onboard Dual-band 802.11ac wireless LAN and Bluetooth 4.2 (including BLE). This edition allows for PXE network and USB mass-storage booting and has a Gigabit Ethernet Network Interface.


Base Price: $54.95
Raspberry Pi Model B+ (old model - Board Only)

The Original Raspberry Pi Model B+ The Raspberry Pi 1 Model B+ has a 700MHz Processor, 512MB RAM, 4x USB Ports, 40x GPIO Pins, microSD connector and full 1080p HDMI video support.


Base Price: $69.95

Dexter Industries

PivotPi Complete Kit (includes Raspberry Pi)

The PivotPi Complete Kit is perfect for getting started with animated robot projects! Code anything in your world to move with 4 small servo motors and 2 large, powerful ones. This is a kit that includes the PivotPi board, battery pack, 2 large servo motors and 4 small servo motors, a Raspberry Pi, case, power supply and cables. Now you can program your robotics, automation, and art projects to move!


Base Price: $149.95
GoBoxEd Classroom Kit (5 kits, 10 Students)

The GoBoxEd Classroom Kit comes with 5 full GoPiGo robot car kits, 5 sets of GoBoxEd sensors (9 different ones) and 12 printed missions to accomplish with your robot!


Base Price: $2,995.00
Dexter Thermal Infrared Sensor

Use the Dexter Thermal Infrared Sensor measures temperature of surfaces with your Raspberry Pi. It is a non-contact thermometer based on the MLX90614.


Base Price: $39.95
Dexter / Grove Sound Sensor

The Sound Sensor is a microphone that allows your GrovePi or GoPiGo robot car to listen to sound strength, so you can control it to take a picture or move around based on changes in noise! Cable included. Connect a Sound Sensor to your Raspberry Pi!


Base Price: $19.95
Dexter dGPS Sensor

The dGPS sensor for Brickpi gives position, speed, direction and time to your robot.


Base Price: $69.95
Dexter / Grove PIR Motion Sensor

The Motion Sensor allows your GrovePi or GoPiGo robot car to detect motion and react based on what happens! Connect the camera to it too and take a picture of anyone that comes to your door! Cable included. Connect a Motion Sensor to your Raspberry Pi!


Base Price: $39.95
PivotPi

The PivotPi Base Kit is perfect for getting started with animated robot projects! Code anything in your world to move with 4 small servo motors and 2 large, powerful ones. This is a kit that includes the PivotPi board, battery pack, 2 large servo motors and 4 small servo motors. Now you can program your robotics, automation, and art projects to move!


Base Price: $39.95
Grove Sound Sensor

The Sound Sensor is a microphone that allows your GrovePi or GoPiGo robot car to listen to sound strength, so you can control it to take a picture or move around based on changes in noise! Cable included.


Base Price: $24.95
Brickpi Power Pack

The Power Battery Pack holds 8 AA batteries to extends the life and allow for mobility of your BrickPi, or GoPiGo (please note: GoPiGo & BrickPi base kit and starter Kit already includes a power battery pack). This should only be ordered separately as a spare part.


Base Price: $9.95
GoPiGo Sensor Mounts / GrovePi Sensor Mounts

This is a set of 4 sensor mounts to allow you to attach your sensors to your GrovePi or GoPiGo robot car!  If you want a moving sensor mount, you’ll have to get the Servo, but for stationary sensing, these are a great solution.


Base Price: $24.95
Servo Module for the GoPiGo

The Servo Package is a device that rotates. It connects directly to the GoPiGo and enables you to control an attached sensor’s rotation with software. This package comes with the servo and mounting hardware for attaching an ultrasonic sensor or Raspberry Pi camera to the GoPiGo Raspberry Pi robot car.


Base Price: $24.95
Distance Sensor for the GoPiGo

Distance Sensor for the GoPiGo.  The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation.  It detects distances from obstacles and objects, giving your robot the ability to navigate. This package includes the cable for connecting the Distance Sensor to the GoPiGo.


Base Price: $39.95
Line Follower for the GoPiGo

The Line Follower attaches to your GoPiGo robot car and enables you to program it to follow a line. Program your GoPiGo to serve a drink across a room, and learn the basics of how automated warehouse or self-driving cars work!


Base Price: $39.95
BrickPi Complete Kit (includes Raspberry Pi)

Get started with the Dexter Industries BrickPi with our complete starter kit that has everything you need to be up and running.


Base Price: $249.95
Arduberry

The Arduberry is a simple and inexpensive way to bring Arduino shields to the Raspberry Pi. The device is a shield that slides over the Raspberry Pi and allows you to stack and use Arduino shields. The Arduberry requires no physical configuration to work with most shields. You can write Arduino sketches (programs) right on your Raspberry Pi.


Base Price: $29.95
BrickPi+ Base Kit v3

The Dexter Industries BrickPi 3 is in stock in Australia here.


Base Price: $169.95

Distance Sensor for the GoPiGo

Distance Sensor for the GoPiGo.  The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation.  It detects distances from obstacles and objects, giving your robot the ability to navigate. This package includes the cable for connecting the Distance Sensor to the GoPiGo.


Base Price: $39.95

Codebug

Codebug Case

This is a specialty case for the codebug which holds it securely and has a clear cover and checkouts so you can access the pushbuttons and I/O contacts, and see the LED lights.


Base Price: $4.95
Codebug Star

This add-on board for the CodeBug allows you to add colour to your creations. Each of the 9 LEDs can be programmed to display different colours as required. This board is ideal for creating colourful patterns or even placed on top of a Christmas tree.


Base Price: $19.95
CodeBug GlowBugs

Add colours to your CodeBug by connecting a chain of GlowBugs. You can set each GlowBug to flash or glow any colour. Strew them across your desk, sew them onto fabrics. Wrap them around your Christmas tree or sew them on your Christmas jumper!


Base Price: $19.90
Alligator Clip Cables (5x 50cm cables with alligator clips on both ends)

5x 50cm long insulated cables with alligator clips on both ends. red, green, yellow, white and black colour codes.


Base Price: $4.95
CodeBug Wearable Board

The CodeBug is a wearable board (that looks like a bug) with 25 LED's and 6 touch-sensitive I/O pads. It is programmed by the supplied micro-USB cable and can be powered either by microUSB or a CR2032 battery (not included).


Base Price: $27.95

Makey Makey

Makey Makey

With the MaKey MaKey your thoughts and dreams can take one step closer to reality. Inventing is near and dear to our hearts, and with this little kit it can be near to yours too. Using alligator clips you can connect the space bar function of the MaKey MaKey controller to the end of a banana, or a pencil, or a piece of Play-Doh, and make that object the keyboard or mouse input. Just touch your “banana” and you control the functionality of the space bar on the computer. Go out and find some cool applications and let your creativity run wild!


Base Price: $69.95

Allo Audio Components

ALLO Boss DAC

The Allo Boss DAC is one of the highest quality Digital to Audio Converters (DAC) for the Raspberry Pi on the market. It has 2x RCA connectors (Left and Right Audio) and an Allo Volt Amp header. It features a dedicated 384 kHz/32bit high-quality DAC PCM5122 for best sound quality


Base Price: $89.95
Kali Reclocker for the Raspberry Pi and Sparky

The Kali Reclocker for the Raspberry Pi and Sparky takes the cheap and noisy digital audio from the Raspberry Pi and cleans it into a crystal clear jitter-free stream to your DAC.


Base Price: $124.95
VOLT Amplifier for Raspberry Pi and Sparky

The VOLT Amplifier for the Raspberry Pi or Sparky is a digital amplifier that will drive two 50w speakers directly from your Raspberry Pi. This version is designed to directly connect to the Piano 2.1 DAC. If you require RCA in, please see the VOLT+.


Base Price: $44.95

Components and Accessories

Limited Edition KODI Case for the Raspberry Pi 4 by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
USB 2.0 micro SD Card Reader

This USB 2.0 microSD Card Reader works on PC, Mac or even Raspberry Pi allowing you to write new images to your SD Card for operation on your Pi.


Base Price: $4.95
FLIRC Case for the Raspberry Pi 4

ETA: Mid September 2019.


Base Price: $34.95
Wired XBOX 360 style Controller for RetroPi

Play all your favorite games using RetroPi with this xbox 360 style USB controller. (Note: RetroPi does not support Xbox 360 games.)


Base Price: $19.95
Pi HAT Case for the Raspberry Pi 3

The Pi HAT case for the Raspberry Pi 3 is designed with a removable section to facilitate HAT style add-on boards to the Raspberry Pi. It has a clear top allowing you to see the board, a slot for a camera cable and suits the Raspberry Pi 3, Raspberry Pi 2 and Raspberry Pi B+.


Base Price: $9.95
Wired SNES ( Super Nintendo Entertainment System) style Controller for RetroPi

Play all your favorite SNES games using RetroPi the way they were always intended to be played with this SNES style USB controller.


Base Price: $14.95
FLIRC USB IR Receiver v2

The FLIRC Universal Infrared Remote Control Receiver lets you use any remote control to control any program on any device that accepts a USB keyboard. It's perfect for your Raspberry Pi, FireTV, Android Media Centre or PC/MAC HTPC. It works perfectly with the Logitech Universal Remote, or any remote you have lying around the house.


Base Price: $39.95
Sandisk microSD SD Card

This is a Sandisk microSD Card which works with all models of Raspberry Pi, pre-loaded with your favorite software for the Raspberry Pi. You can select the size of the SD Card and your preference for software.


Base Price: $10.95
Limited Edition KODI Case by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
Multicomp Case for the (Old Model) Original Raspberry Pi

This is a molded plastic case for the the Raspberry Pi Model A, and Raspberry Pi Model B. (it does not fit the Raspberry Pi Model B+)


Base Price: $9.95
New 8MP Raspberry Pi Camera Board v2

The Raspberry Pi Camera Module v2 is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. It has a native resolution of 8 megapixes, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.


Base Price: $39.95
New 8MP Raspberry Pi IR Camera Board (NoIR Camera Module)

The Raspberry Pi NoIR v2 Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It's able to deliver clear 8MP resolution image, or 1080p HD video recording at 30fps.

 

Base Price: $39.95
Battery for the real time clock (RTC) for the Raspberry Pi

This is a single 3 volt CR1220 button battery, which can be used to power the real-time clock for the Raspberry Pi.


Base Price: $4.95
Raspberry Pi Official Power Supply

This is the official 240v Power Supply for the Raspberry Pi 3. It has an output capacity of 2,500mA, and an integrated 1.5 meter cable with micro-USB plug. It comes with International plugs and has enough output for all models of the Raspberry Pi.


Base Price: $22.95
FLIRC USB IR Receiver v1

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion. Flirc learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup- pairing individual remote buttons with 'Media Centre Buttons' and you're done.  


Base Price: $29.95
Short Micro USB Cable

This is a 10cm USB to MicroUSB cable that can be used for power or data. It's very useful for attaching Raspberry-Pi mounted USB accessories.


Base Price: $2.95
Raspberry Pi Heatsink Kit

The PI HEATSINK KIT is a Raspberry PI heat sink kit for ensuring Raspberry PI to remain cool with no need of noisy fans. This heat sink will also help extend the life of Raspberry PI and thereby reduces hardware failures. The heat sink kit comprises of three high quality Pressfin heat sinks which are designed to fit the three main heat sources on the Raspberry PI. The 50mm × 50mm piece of thermal adhesive tape in the kit used to securely fix the heat sinks in place and to ensure a good thermal transfer bond.


Base Price: $14.95
Microstack Accelerometer

The MICROSTACK ACCELEROMETER provides easy, plug and play integration and development for designs requiring a accelerometer function to all platforms compatible with the Microstack framework. The Acceleration sensor features a MMA8491Q is a low voltage, 3-axis low-g accelerometer in a 3x3mm QFN package that can accommodate two configurations, acting as either a 45° tilt sensor or a digital output 14-bit ±8g accelerometer with I2C bus, and connects to the MicroStack Baseboard.


Base Price: $19.95
PiFace IO Shim

The PIFACE IO Shim works with the Raspberry Pi 2 and Raspberry Pi B+ with 40 GPIOs to duplicate the header pins when an add-on board is connected directly to the Raspberry Pi GPIO.  The SHIM has two sets of plated thru holes in the same RPI GPIO configuration with the relative holes connected together. With one set of holes placed over the Raspberry Pi headers the other set of holes on the SHIM can accommodate header pins, wires, etc. to support the users application while not covering up the RPI header pins for additional add on boards.


Base Price: $9.95
micro-SD to SD Card Adapter

This adapter allows a micro-SD Card to be used as a full-size SD Card  


Base Price: $1.00
EDUP EP-N8508GS 802.11n USB 150 Mbps Wireless Wifi For Raspberry Pi

The EDUP EP-N8508GS 802.11n is a micro wireless adapter for your Raspberry Pi. It works with all major software distributions.


Base Price: $14.95
GPIO Extender Cable for Raspberry Pi Model A/B - 26pin 12" long

Give your Pi some reach with this GPIO extender cable, which has two matching connectors on the end of a 12" (300mm) long gray cable. Plug one end into your Pi and the other end will have a boxed male header you can plug in a Pi Plate that is expecting to go onto a Pi. This cable is not compatible with the Raspberry Pi Model B+.


Base Price: $4.95
ModMyPi Case (Complete) ModMyPi Case for the Raspberry Pi 2

The Modular Raspberry Pi Model B+ Raspberry Pi case features ports for all the model B+ and Raspberry Pi 2 connectors, LED lights pipes, in addition to a range of optional add-on features including an SD card cover, 10mm spacer plate, an optional USB shroud, VESA mounting and secure screw locking. This package includes one ModMyPi Case, one HDMI/USB Shroud, a Spacer Plate and the SD Card Cover.


Base Price: $24.95
12v (8-40v) to 5 volt 5 Amp 4 Port USB Power Supply

This 4.8 x 3.8 x 2.2cm board takes an input voltage of 8 to 40 volts, and converts it to an output of 5 volts, 5 Amps. It has 4 USB ports, so it is ideal for powering a Raspberry Pi and USB peripherals from a car or other DC power supply.


Base Price: $14.95
Microstack GPS Receiver

MICROSTACK is a framework of cross platform accessories that add functions to your designs through the use of cross platform module boards and platform specific adapter boards. Adapters to various platforms, starting with Raspberry Pi, add a common physical interface for connecting Microstack accessory module boards that are reuseable between designs and platforms. MICROSTACK GPS features the L80 ultra slim POT(Patch on Top) module with an embedded 15x15mm patch antenna, this MICROSTACK module adds GPS positioning functions to all platforms compatible with the Microstack framework. This space-saving design makes L80 become the perpect module for the miniature devices. Adopted by LCC package and integrated with patch antenna, L80 has exceptional performance both in acquisition and tracking.


Base Price: $34.95
MicroStack Base Board for the Raspberry Pi 2

MICROSTACK is a family of reusable accessory boards with a common framework consisting of form factor and interface connections that work across various different single board computer(SBC) platforms through the use of platform specific base boards (adapter boards) starting with Raspberry Pi. MICROSTACK ADAPTER BOARD works with the Raspberry Pi to allow for two Microstack module boards to connect and work with Raspberry Pi in a easy and quick manner. Microstck boards do not interface directly with a SBC platform but through a base board like the MICROSTACK adapter board.


Base Price: $19.95
Real Time Clock (RTC) for the Raspberry Pi

SHIM RTC is a battery backed up realtime clock and calendar add on board for Raspberry Pi that does not get in the way of other add on boards providing easy, plug and play integration and development for designs and/or applications requiring time stamps. Board communicates via I2C interface, supported by a back-up battery to ensure on-going timekeeping operation in power-down situation. Battery not included. PiFace Real Time Clock means your Raspberry Pi always has the correct time. Furthermore, it's that small you'll hardly notice it's there! You can slip it inside most cases and under, most add-on boards!


Base Price: $14.95
PiFace Control and Display 2 - I/O and Display for the Raspberry Pi 3, Model B+ and Raspberry Pi 2

The PiFace Control and Display has been updated for the Raspberry Pi Model B+! It has a 16 character, two line display (16x2), 5 push-button tactile switches, a LED backlight, a 3-position navigation switch, and an IR Receiver. It comes with Python Libraries so you can control it, and has immediate uses in Internet Radio, Streaming media and embedded Applications.


Base Price: $44.95
FLIRC v2 Case for the Raspberry Pi 3+ (also suits Raspberry Pi 2 and B+)

The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software.


Base Price: $29.95
Audio Video cable for the Raspberry Pi 2 & 3

The new Model A+ and Model B+ Raspberry Pi boards integrate stereo audio and component video into the 3.5mm jack on the board. This means a standard audio cable will no longer suffice to connect to your amplifier or speakers. This cable is 5 meters long and allows you to connect stereo audio or component video to your TV or Amplifier. Important Note: When plugged into the Pi, the colour code for this cable is: White = Video, Red = Left Audio, Yellow = Right Audio.


Base Price: $4.95
USB Mouse

It's a USB Mouse, it has a cord, and a USB plug. It doesn't need batteries and it doesn't need cleaning! It's amazing!  


Base Price: $4.99
Breadboard Jumper Wires - Male to Female - 40 Pack

The male to female breadboard jumper wires are ideal for connecting the GPIO pins on the Raspberry Pi directly to your breadboard.
The flexible, durable and reusable jumper wires are easy to trace, easy to connect and disconnect.
These jumper wires are useful and convenient for prototyping.
Package includes: - 40 x 200mm wires

Base Price: $7.95
Breadboard Jumper Wires - Female to Female - 40 Pack

The female to female breadboard wires set is very useful for prototyping .
These wires are perfect for connecting the GPIO pins to a Pi Cobbler or T-Cobbler kit.
The wire is flexible and can be used over and over again.
The jumper wire set is essential and greatly useful for breadboard.
Package includes: 40 wires, each 300mm long

Base Price: $4.95
Case for the Raspberry Pi Camera Board

A neat little carbon-fibre look case for your Raspberry Pi Camera Board, which is made out of 3mm Acrylic Capped ABS that clips into place without the need for screws. Has two mounting holes at the bottom for easy mounting.


Base Price: $15.99
HDMI to VGA converter

Plug your Raspberry Pi into a VGA monitor.


Base Price: $19.95
GPIO Ribbon Cable for Raspberry Pi

That new Raspberry Pi computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails. If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 20cm long and has 40 socket & wire sets.


Base Price: $4.95
Raspberry Pi Camera Board

The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. It has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.


Base Price: $39.95
12 volt to 5 volt 3,000mA step-down transformer

This device allows you to run our USB Hubs from a cigarette lighter or 12 volt power source in your car. By running a USB Hub you can power a portable hard drive and Raspberry Pi from the Hub for a full in-car PC.


Base Price: $4.95
40-Pin GPIO Reference Card

This card fits neatly over the 40-pin GPIO of the Raspberry Pi Model B+. It provides an easy reference to ensure you are connecting your jumper wires to the correct pins.


Base Price: $4.95
USB Cigarette Lighter Plug

This is an in-car USB power supply that plugs into your cigarette lighter. It is Suitable for powering the Raspberry Pi in the car.


Base Price: $9.95
Micro USB power Cable for Raspberry Pi

This is a USB to micro-USB cable. It is suitable for powering the Raspberry Pi from a 1,000mA USB Power Source, and can also be used for standard data transfer &  charging cable for most Android devices.


Base Price: $4.95
2 meter USB Extension Cable

This is a 2 meter long USB Extension cable. It is useful if you have a FLIRC IR Receiver or a USB Hard Drive that you want to place some distance from your Raspberry Pi.  


Base Price: $3.95
25cm USB Extension Cable

This is a 25cm long USB extension cable. It is useful for plugging bulky USB devices into a USB Hub, so you can still use the USB Ports beside the bulky device.


Base Price: $1.95
5 Meter HDMI Cable

This is a 5 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.


Base Price: $19.95
3 Meter HDMI Cable

This is a 3 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.


Base Price: $14.95
WiPi Wireless Adaptor

The Wi-Pi module is a high performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network. The Wi-Pi module supports 802.11n standards with data rate upto 150Mbps, it supports wireless roaming, and uses the latest international wireless CCA air channel detection technology, enhancing wireless performance.


Base Price: $24.20
Wireless Keyboard+Trackpad Combo Remote

This qwerty keyboard with trackerpad remote control works without a powered hub on the Raspberry Pi, with a 10 meter operating range.  


Base Price: $28.95
2 meter 3.5mm to Stereo RCA Audio Cable

This is a 2 Meter Audio Cable used for connecting a Model A or Model B Raspberry Pi into an audio device that uses RCA Audio In. It can also be used to connect your iPhone, Android, or Walkman into your home amplifier.  


Base Price: $4.95
1.8 meter 3.5mm to 3.5mm Stereo Audio Cable

This is a 1.8 meter long audio cable with 3.5mm stereo connectors on each end. You can use it to connect your Raspberry Pi Model A or Model B into any amplifier that has 3.5mm audio in (for example, most new model cars). You could also use it to connect a Walkman to the audio-in of your car (provided your car is 20 years newer than your Walkman.)


Base Price: $4.99
HDMI to DVI Adaptor

This Adapter allows you to display output from the Raspberry Pi on a computer monitor that has DVI input. It connects from a HDMI cable to the DVI port.


Base Price: $9.95
1.8 Meter HDMI Cable

This is a 1.8 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.


Base Price: $9.95
Gertboard

Are you looking to expand your horizons and start controlling the physical world around you with your Raspberry Pi?  If so, the Gertboard is for you! Yu can detect and output analogue voltages, drive motors, detect switch presses, illuminate LEDs and drive relays. Jumper cables allow you to hook up different parts of the circuit in any different ways, allowing total flexibility all controlled by your Raspberry Pi.


Base Price: $29.95
2 Meter Cat5e Cable

This is a 2 Meter Cat5e cable. It connects your Raspberry Pi to a network.


Base Price: $4.95

Cases

Limited Edition KODI Case for the Raspberry Pi 4 by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
FLIRC Case for the Raspberry Pi 4

ETA: Mid September 2019.


Base Price: $34.95
Pi HAT Case for the Raspberry Pi 3

The Pi HAT case for the Raspberry Pi 3 is designed with a removable section to facilitate HAT style add-on boards to the Raspberry Pi. It has a clear top allowing you to see the board, a slot for a camera cable and suits the Raspberry Pi 3, Raspberry Pi 2 and Raspberry Pi B+.


Base Price: $9.95
Limited Edition KODI Case by FLIRC

Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.


Base Price: $36.95
Multicomp Case for the (Old Model) Original Raspberry Pi

This is a molded plastic case for the the Raspberry Pi Model A, and Raspberry Pi Model B. (it does not fit the Raspberry Pi Model B+)


Base Price: $9.95
ModMyPi Case (Complete) ModMyPi Case for the Raspberry Pi 2

The Modular Raspberry Pi Model B+ Raspberry Pi case features ports for all the model B+ and Raspberry Pi 2 connectors, LED lights pipes, in addition to a range of optional add-on features including an SD card cover, 10mm spacer plate, an optional USB shroud, VESA mounting and secure screw locking. This package includes one ModMyPi Case, one HDMI/USB Shroud, a Spacer Plate and the SD Card Cover.


Base Price: $24.95
FLIRC v2 Case for the Raspberry Pi 3+ (also suits Raspberry Pi 2 and B+)

The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software.


Base Price: $29.95

Power Supplies

Raspberry Pi Official Power Supply

This is the official 240v Power Supply for the Raspberry Pi 3. It has an output capacity of 2,500mA, and an integrated 1.5 meter cable with micro-USB plug. It comes with International plugs and has enough output for all models of the Raspberry Pi.


Base Price: $22.95
12v (8-40v) to 5 volt 5 Amp 4 Port USB Power Supply

This 4.8 x 3.8 x 2.2cm board takes an input voltage of 8 to 40 volts, and converts it to an output of 5 volts, 5 Amps. It has 4 USB ports, so it is ideal for powering a Raspberry Pi and USB peripherals from a car or other DC power supply.


Base Price: $14.95
12 volt to 5 volt 3,000mA step-down transformer

This device allows you to run our USB Hubs from a cigarette lighter or 12 volt power source in your car. By running a USB Hub you can power a portable hard drive and Raspberry Pi from the Hub for a full in-car PC.


Base Price: $4.95
Micro USB power Cable for Raspberry Pi

This is a USB to micro-USB cable. It is suitable for powering the Raspberry Pi from a 1,000mA USB Power Source, and can also be used for standard data transfer &  charging cable for most Android devices.


Base Price: $4.95

Breadboards

170 Tie Point Solderless Breadboard

This is a small breadboard with 170 tie points. Good for tiny projects.


Base Price: $4.95
400 Tie Point Solderless Breadboard

This is a half size breadboard with 400 tie points. Good for small projects.


Base Price: $6.95
700 Tie Point Solderless Breadboard

This is a three-quarter size breadboard with 700 tie points. Good for small and medium projects.


Base Price: $8.95
830 Tie Point Solderless Breadboard

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects.


Base Price: $9.95

Keyboards & Controllers

Wired XBOX 360 style Controller for RetroPi

Play all your favorite games using RetroPi with this xbox 360 style USB controller. (Note: RetroPi does not support Xbox 360 games.)


Base Price: $19.95
Wired SNES ( Super Nintendo Entertainment System) style Controller for RetroPi

Play all your favorite SNES games using RetroPi the way they were always intended to be played with this SNES style USB controller.


Base Price: $14.95
FLIRC USB IR Receiver v2

The FLIRC Universal Infrared Remote Control Receiver lets you use any remote control to control any program on any device that accepts a USB keyboard. It's perfect for your Raspberry Pi, FireTV, Android Media Centre or PC/MAC HTPC. It works perfectly with the Logitech Universal Remote, or any remote you have lying around the house.


Base Price: $39.95
FLIRC USB IR Receiver v1

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion. Flirc learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup- pairing individual remote buttons with 'Media Centre Buttons' and you're done.  


Base Price: $29.95
Wireless Keyboard+Trackpad Combo Remote

This qwerty keyboard with trackerpad remote control works without a powered hub on the Raspberry Pi, with a 10 meter operating range.  


Base Price: $28.95

Books

Learning Computer Architecture with Raspberry Pi

Learning Computer Architecture with the Raspberry Pi explains what each hardware component does, how they relate to one another, and how they correspond to the components of other computing systems. You'll also learn how programming works and how the operating system relates to the Raspberry Pi's physical components.


Base Price: $39.95