Shop

SHOWING 21–40 OF 120 RESULTS

  • FLIRC USB IR Receiver v2

    Quick Overview

    The FLIRC Universal Infrared Remote Control Receiver lets you use any remote control to control any program on any device that accepts a USB keyboard. It’s perfect for your Raspberry Pi, FireTV, Android Media Centre or PC/MAC HTPC. It works perfectly with the Logitech Universal Remote, or any remote you have lying around the house.

    $39.95

  • HDMI to DVI Adaptor

    HDMIDVI
    Quick Overview

    This Adapter allows you to display output from the Raspberry Pi on a computer monitor that has DVI input. It connects from a HDMI cable to the DVI port.

    $9.95

  • FlightAware Pro Stick Plus Blue

    FAPSPB
    Quick Overview

    FlightAware has revolutionized the world of USB SDR ADS-B Receivers with the FlightAware Pro Stick and Pro Stick Plus, high-performance USB R820T2 software defined radios (SDR) with a built-in RF amp for maximum ADS-B/MLAT performance.

    The Pro Stick Plus adds a built-in 1090 MHz bandpass filter for increased performance and range of reception in areas with moderate RF noise as is typically experienced in most urban areas.

    $44.95

  • Remote Control for FLIRC

    Quick Overview

    The FLIRC will work with any IR Remote Control, so if you have an old one lying around the house, you can use it. Otherwise, These remote controls have all the buttons you will need to control your favorite media center from the comfort of the couch.

    $14.95 $9.95

  • EDUP EP-N8508GS 802.11n USB 150 Mbps Wireless Wifi For Raspberry Pi

    EP-N8508GS
    Quick Overview

    The EDUP EP-N8508GS 802.11n is a micro wireless adapter for your Raspberry Pi. It works with all major software distributions.

    $14.95

  • Micro USB power Cable for Raspberry Pi

    MUSB1.8
    Quick Overview

    This is a USB to micro-USB cable. It is suitable for powering the Raspberry Pi from a 1,000mA USB Power Source, and can also be used for standard data transfer &  charging cable for most Android devices.

    $4.95

  • New 8MP Raspberry Pi IR Camera Board (NoIR Camera Module)

    CAM2NOIR
    Quick Overview

    The Raspberry Pi NoIR v2 Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver clear 8MP resolution image, or 1080p HD video recording at 30fps.

     
    $39.95

  • 40-Pin GPIO Reference Card

    LVLGPIO
    Quick Overview

    This card fits neatly over the 40-pin GPIO of the Raspberry Pi Model B+. It provides an easy reference to ensure you are connecting your jumper wires to the correct pins.

    $5.50 $4.95

  • HDMI to VGA converter

    HDMIVGA
    Quick Overview

    Plug your Raspberry Pi into a VGA monitor.

    $19.95

  • Breadboard Jumper Wires – Female to Female – 40 Pack

    BJWFF
    Quick Overview
    The female to female breadboard wires set is very useful for prototyping .
    These wires are perfect for connecting the GPIO pins to a Pi Cobbler or T-Cobbler kit.
    The wire is flexible and can be used over and over again.
    The jumper wire set is essential and greatly useful for breadboard.
    Package includes: 40 wires, each 300mm long
    $7.95 $4.95

  • Case for the Raspberry Pi Camera Board

    CAMCASE
    Quick Overview

    A neat little carbon-fibre look case for your Raspberry Pi Camera Board, which is made out of 3mm Acrylic Capped ABS that clips into place without the need for screws.

    Has two mounting holes at the bottom for easy mounting.

    $15.99

  • FlightAware 5dBi 66cm/26 inch 1090MHz Antenna

    FA66CM
    Quick Overview

    5dBi 66cm (26″) High performance, omni directional antenna for receiving 1090MHz mode S and ADS-B data from aircraft.

    $99.95

  • SMA Male to N Type Male Pigtail Cable

    SMANPIGTAIL
    Quick Overview

    Connect your 5dBi antenna to the Flightaware Pro Stick using this SMA to N Type Pigtail.

    $5.95

  • Original Raspberry Pi IR Camera Board (NoIR Camera Module)

    CAMNOIR
    Quick Overview

    The Raspberry Pi NoIR Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver clear 5MP resolution image, or 1080p HD video recording at 30fps! Latest Version 1.3!

    The camera is supported in the latest version of Raspbian, the Raspberry Pi’s preferred operating system.
     
    $39.95

  • Audio Video cable for the Raspberry Pi 2 & 3

    3RCA5M
    Quick Overview

    The new Model A+ and Model B+ Raspberry Pi boards integrate stereo audio and component video into the 3.5mm jack on the board. This means a standard audio cable will no longer suffice to connect to your amplifier or speakers. This cable is 5 meters long and allows you to connect stereo audio or component video to your TV or Amplifier. Important Note: When plugged into the Pi, the colour code for this cable is: White = Video, Red = Left Audio, Yellow = Right Audio.

    $4.95

  • BrickPi+ Base Kit v3

    BRICKPIA
    Quick Overview

    The Dexter Industries BrickPi 3 is in stock in Australia here.

    $169.95

  • Real Time Clock (RTC) for the Raspberry Pi

    SHIMRTC
    Quick Overview

    SHIM RTC is a battery backed up realtime clock and calendar add on board for Raspberry Pi that does not get in the way of other add on boards providing easy, plug and play integration and development for designs and/or applications requiring time stamps. Board communicates via I2C interface, supported by a back-up battery to ensure on-going timekeeping operation in power-down situation. Battery not included.

    PiFace Real Time Clock means your Raspberry Pi always has the correct time. Furthermore, it’s that small you’ll hardly notice it’s there! You can slip it inside most cases and under, most add-on boards!

    $14.95

  • 3 Meter HDMI Cable

    HDMI30
    Quick Overview

    This is a 3 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.

    $14.95

  • Distance Sensor for the GoPiGo

    GoPiUltrasonic
    Quick Overview

    Distance Sensor for the GoPiGo.  The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation.  It detects distances from obstacles and objects, giving your robot the ability to navigate.

    This package includes the cable for connecting the Distance Sensor to the GoPiGo.

    $39.95

  • GPIO Ribbon Cable for Raspberry Pi

    GPIOCABLE
    Quick Overview

    That new Raspberry Pi computer you just got has a row of 2×20 pin headers soldered on – those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.

    If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 20cm long and has 40 socket & wire sets.

    $4.95