Shop

View Cart “CodeBug Wearable Board” has been added to your cart.

SHOWING 21–40 OF 85 RESULTS

  • HDMI to VGA converter

    HDMIVGA
    Quick Overview

    Plug your Raspberry Pi into a VGA monitor.

    $19.95

  • Breadboard Jumper Wires – Female to Female – 40 Pack

    BJWFF
    Quick Overview
    The female to female breadboard wires set is very useful for prototyping .
    These wires are perfect for connecting the GPIO pins to a Pi Cobbler or T-Cobbler kit.
    The wire is flexible and can be used over and over again.
    The jumper wire set is essential and greatly useful for breadboard.
    Package includes: 40 wires, each 300mm long
    $7.95 $4.95

  • Case for the Raspberry Pi Camera Board

    CAMCASE
    Quick Overview

    A neat little carbon-fibre look case for your Raspberry Pi Camera Board, which is made out of 3mm Acrylic Capped ABS that clips into place without the need for screws.

    Has two mounting holes at the bottom for easy mounting.

    $15.99

  • Original Raspberry Pi IR Camera Board (NoIR Camera Module)

    CAMNOIR
    Quick Overview

    The Raspberry Pi NoIR Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver clear 5MP resolution image, or 1080p HD video recording at 30fps! Latest Version 1.3!

    The camera is supported in the latest version of Raspbian, the Raspberry Pi’s preferred operating system.
     
    $39.95

  • 3 Meter HDMI Cable

    HDMI30
    Quick Overview

    This is a 3 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.

    $14.95

  • Distance Sensor for the GoPiGo

    GoPiUltrasonic
    Quick Overview

    Distance Sensor for the GoPiGo.  The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation.  It detects distances from obstacles and objects, giving your robot the ability to navigate.

    This package includes the cable for connecting the Distance Sensor to the GoPiGo.

    $39.95

  • GPIO Ribbon Cable for Raspberry Pi

    GPIOCABLE
    Quick Overview

    That new Raspberry Pi computer you just got has a row of 2×20 pin headers soldered on – those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.

    If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 20cm long and has 40 socket & wire sets.

    $4.95

  • Servo Module for the GoPiGo

    GoPiServo
    Quick Overview

    The Servo Package is a device that rotates. It connects directly to the GoPiGo and enables you to control an attached sensor’s rotation with software. This package comes with the servo and mounting hardware for attaching an ultrasonic sensor or Raspberry Pi camera to the GoPiGo Raspberry Pi robot car.

    $24.95

  • 12v (8-40v) to 5 volt 5 Amp 4 Port USB Power Supply

    DC4PORTUSB
    Quick Overview

    This 4.8 x 3.8 x 2.2cm board takes an input voltage of 8 to 40 volts, and converts it to an output of 5 volts, 5 Amps. It has 4 USB ports, so it is ideal for powering a Raspberry Pi and USB peripherals from a car or other DC power supply.

    $14.95

  • FLIRC Case for the Raspberry Pi 4

    FLIRCPI4CASE
    Quick Overview

    The Flirc Raspberry Pi 4 case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software.

    $31.95

  • FLIRC+Remote Bundle

    Quick Overview

    The FLIRC will work with any IR remote control, so if you have an old one lying around the house, you need only buy a FLIRC. However, if you would like a brand new Remote Control with all the buttons you expect to control a Media Centre, this is the bundle for you.

    $54.90 $49.90

  • Short Micro USB Cable

    SHORTMUSB
    Quick Overview

    This is a 10cm USB to MicroUSB cable that can be used for power or data. It’s very useful for attaching Raspberry-Pi mounted USB accessories.

    $2.95

  • Case for the Raspberry Pi 7" touchscreen

    MCTSCASE
    Quick Overview

    The first integrated case for the Raspberry Pi 7″ Touchscreen and a Raspberry Pi. Comes pre-drilled and with the necessary screws for assembly, no modification required.

    $59.95

  • 25cm USB Extension Cable

    USB25
    Quick Overview

    This is a 25cm long USB extension cable. It is useful for plugging bulky USB devices into a USB Hub, so you can still use the USB Ports beside the bulky device.

    $1.95

  • 5 Meter HDMI Cable

    HDMI50
    Quick Overview

    This is a 5 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.

    $19.95

  • Limited Edition KODI Case for Raspberry Pi 3 by FLIRC

    KODIFLIRC
    Quick Overview

    Flirc was invited to share and create in the building of the first Kodi hardware product. The Kodi Edition Raspberry Pi Case is a special edition run. A limited quantity were built and the product shares all the same great qualities as the Flirc Raspberry Pi Case. Kodi is the registered trademark of the XBMC foundation and Flirc was granted permission to use their logo.

    $49.95 $36.95

  • CodeBug Wearable Board

    CODEBUG
    Quick Overview

    The CodeBug is a wearable board (that looks like a bug) with 25 LED’s and 6 touch-sensitive I/O pads. It is programmed by the supplied micro-USB cable and can be powered either by microUSB or a CR2032 battery (not included).

    $27.95

  • FlightAware ADS-B 1090MHz Band-pass SMA Filter

    FAFITLER
    Quick Overview

    The FlightAware SMA (female to male) 1090MHz Mode S filter is designed to reduce interference and significantly improve the valid mesage rate of ADS-B/Mode S receivers. It passes range 980MHz – 1150MHz. Impedance is 50ohms and insertion loss is <2.5dB.

    $29.95

  • Official Raspberry Pi Zero W Case

    PIZEROCASE
    Quick Overview

    Keep your Raspberry Pi Zero W / Pi Zero safe in this sleek official case. We expect this item to be in stock on the 26th of March.

    $9.95

  • Gertboard

    GERT
    Quick Overview

    Are you looking to expand your horizons and start controlling the physical world around you with your Raspberry Pi?  If so, the Gertboard is for you!
    Yu can detect and output analogue voltages, drive motors, detect switch presses, illuminate LEDs and drive relays. Jumper cables allow you to hook up different parts of the circuit in any different ways, allowing total flexibility all controlled by your Raspberry Pi.

    $59.95 $29.95