Shop

SHOWING 41–60 OF 132 RESULTS

  • HDMI to VGA converter

    HDMIVGA
    Quick Overview

    Plug your Raspberry Pi into a VGA monitor.

    $19.95

  • Raspberry Pi 2 Model B WiFi Kit

    Quick Overview

    The Raspberry Pi WiFi Kit has everything you need to start using your Raspberry Pi with a wireless network connection.

    Click “Next – Case” on the right hand side to begin configuring the options for your kit.

    From: $39.95

  • Premium Media Centre Package (includes Raspberry Pi)

    Quick Overview

    If you are looking to use your Raspberry Pi to run XBMC on your TV, this is the package for you.

    This Package Contains: A Raspberry Pi in your choice of premium Case, An 8GB microSD Card preloaded NOOBs operating system in a micro-SD to SD Adapter, A 1200mA Power Supply with a 1.8m MicroUSB power cable, A USB WiFi Adapter, A HDMI Cable, A Cat5e Network Cable, and A SD Card Reader (for your PC), a FLIRC Universal IR Receiver and a 5 meter analogue Audio/Video cable.

     

    From: $113.75

  • Breadboard Jumper Wires – Female to Female – 40 Pack

    BJWFF
    Quick Overview
    The female to female breadboard wires set is very useful for prototyping .
    These wires are perfect for connecting the GPIO pins to a Pi Cobbler or T-Cobbler kit.
    The wire is flexible and can be used over and over again.
    The jumper wire set is essential and greatly useful for breadboard.
    Package includes: 40 wires, each 300mm long
    $7.95 $4.95

  • Case for the Raspberry Pi Camera Board

    CAMCASE
    Quick Overview

    A neat little carbon-fibre look case for your Raspberry Pi Camera Board, which is made out of 3mm Acrylic Capped ABS that clips into place without the need for screws.

    Has two mounting holes at the bottom for easy mounting.

    $15.99

  • Original Raspberry Pi IR Camera Board (NoIR Camera Module)

    CAMNOIR
    Quick Overview

    The Raspberry Pi NoIR Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver clear 5MP resolution image, or 1080p HD video recording at 30fps! Latest Version 1.3!

    The camera is supported in the latest version of Raspbian, the Raspberry Pi’s preferred operating system.
     
    $39.95

  • Audio Video cable for the Raspberry Pi 2 & 3

    3RCA5M
    Quick Overview

    The new Model A+ and Model B+ Raspberry Pi boards integrate stereo audio and component video into the 3.5mm jack on the board. This means a standard audio cable will no longer suffice to connect to your amplifier or speakers. This cable is 5 meters long and allows you to connect stereo audio or component video to your TV or Amplifier. Important Note: When plugged into the Pi, the colour code for this cable is: White = Video, Red = Left Audio, Yellow = Right Audio.

    $4.95

  • BrickPi+ Base Kit v3

    BRICKPIA
    Quick Overview

    The Dexter Industries BrickPi 3 is in stock in Australia here.

    $169.95

  • SMA Male to N Type Male Pigtail Cable

    SMANPIGTAIL
    Quick Overview

    Connect your 5dBi antenna to the Flightaware Pro Stick using this SMA to N Type Pigtail.

    $5.95

  • Breadboard Jumper Wires – Male to Male – 70 Pack

    BJWMM
    Quick Overview
    The male to male breadboard jumper wires are ideal creating circuits on your breadboard.
    The flexible, durable and reusable jumper wires are easy to trace, easy to connect and disconnect.
    These jumper wires are useful and convenient for prototyping.
    Package includes:
    – 50 x 120mm wires
    – 10 x 150mm wires
    – 5 x 200mm wires
    – 5 x 240mm wires
    $7.95

  • Real Time Clock (RTC) for the Raspberry Pi

    SHIMRTC
    Quick Overview

    SHIM RTC is a battery backed up realtime clock and calendar add on board for Raspberry Pi that does not get in the way of other add on boards providing easy, plug and play integration and development for designs and/or applications requiring time stamps. Board communicates via I2C interface, supported by a back-up battery to ensure on-going timekeeping operation in power-down situation. Battery not included.

    PiFace Real Time Clock means your Raspberry Pi always has the correct time. Furthermore, it’s that small you’ll hardly notice it’s there! You can slip it inside most cases and under, most add-on boards!

    $14.95

  • FlightAware 5dBi 66cm/26 inch 1090MHz Antenna

    FA66CM
    Quick Overview

    5dBi 66cm (26″) High performance, omni directional antenna for receiving 1090MHz mode S and ADS-B data from aircraft.

    $99.95

  • 3 Meter HDMI Cable

    HDMI30
    Quick Overview

    This is a 3 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.

    $14.95

  • Distance Sensor for the GoPiGo

    GoPiUltrasonic
    Quick Overview

    Distance Sensor for the GoPiGo.  The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation.  It detects distances from obstacles and objects, giving your robot the ability to navigate.

    This package includes the cable for connecting the Distance Sensor to the GoPiGo.

    $39.95

  • GPIO Ribbon Cable for Raspberry Pi

    GPIOCABLE
    Quick Overview

    That new Raspberry Pi computer you just got has a row of 2×20 pin headers soldered on – those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.

    If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 20cm long and has 40 socket & wire sets.

    $4.95

  • Servo Module for the GoPiGo

    GoPiServo
    Quick Overview

    The Servo Package is a device that rotates. It connects directly to the GoPiGo and enables you to control an attached sensor’s rotation with software. This package comes with the servo and mounting hardware for attaching an ultrasonic sensor or Raspberry Pi camera to the GoPiGo Raspberry Pi robot car.

    $24.95

  • Raspberry Pi 7" touch screen

    RPI7TS
    Quick Overview

    The 7″ Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. It supports up to 10 concurrent touch-points, and is truly interactive as the latest software drivers supports a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.

    $149.95

  • FLIRC+Remote Bundle

    Quick Overview

    The FLIRC will work with any IR remote control, so if you have an old one lying around the house, you need only buy a FLIRC. However, if you would like a brand new Remote Control with all the buttons you expect to control a Media Centre, this is the bundle for you.

    $54.90 $49.90

  • 12v (8-40v) to 5 volt 5 Amp 4 Port USB Power Supply

    DC4PORTUSB
    Quick Overview

    This 4.8 x 3.8 x 2.2cm board takes an input voltage of 8 to 40 volts, and converts it to an output of 5 volts, 5 Amps. It has 4 USB ports, so it is ideal for powering a Raspberry Pi and USB peripherals from a car or other DC power supply.

    $14.95

  • BrickPi Complete Kit (includes Raspberry Pi)

    Quick Overview

    Get started with the Dexter Industries BrickPi with our complete starter kit that has everything you need to be up and running.

    From: $290.95 $249.95