This is a 1.8 meter long HDMI cable, that supports Full HDMI Specification version 1.4, supporting Ethernet over HDMI, Full 1080p HD Video and Audio, 4K Video, and DTS/DTS-HD/Dolby Digital HDMI Audio Passthrough.
This is the official 240v Power Supply for the Raspberry Pi 3. It has an output capacity of 2,500mA, and an integrated 1.5 meter cable with micro-USB plug. It comes with International plugs and has enough output for all models of the Raspberry Pi.
The Flirc Raspberry Pi case was designed to not only be functional for your Raspberry Pi, but to be drop dead gorgeous. It’s made of beautiful aluminum core that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it’s out of your hands, it’s deserving to be proudly on display running your favorite media center software.
This is a Sandisk microSD Card which works with all models of Raspberry Pi, pre-loaded with your favorite software for the Raspberry Pi. You can select the size of the SD Card and your preference for software.
The PI HEATSINK KIT is a Raspberry PI heat sink kit for ensuring Raspberry PI to remain cool with no need of noisy fans. This heat sink will also help extend the life of Raspberry PI and thereby reduces hardware failures. The heat sink kit comprises of three high quality Pressfin heat sinks which are designed to fit the three main heat sources on the Raspberry PI. The 50mm × 50mm piece of thermal adhesive tape in the kit used to securely fix the heat sinks in place and to ensure a good thermal transfer bond.
The Raspberry Pi Camera Module v2 is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. It has a native resolution of 8 megapixes, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. It has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
This device allows you to run our USB Hubs from a cigarette lighter or 12 volt power source in your car.
By running a USB Hub you can power a portable hard drive and Raspberry Pi from the Hub for a full in-car PC.
The Wi-Pi module is a high performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network. The Wi-Pi module supports 802.11n standards with data rate upto 150Mbps, it supports wireless roaming, and uses the latest international wireless CCA air channel detection technology, enhancing wireless performance.
The FLIRC Universal Infrared Remote Control Receiver lets you use any remote control to control any program on any device that accepts a USB keyboard. It’s perfect for your Raspberry Pi, FireTV, Android Media Centre or PC/MAC HTPC. It works perfectly with the Logitech Universal Remote, or any remote you have lying around the house.
This is a USB to micro-USB cable. It is suitable for powering the Raspberry Pi from a 1,000mA USB Power Source, and can also be used for standard data transfer & charging cable for most Android devices.
The Raspberry Pi NoIR v2 Camera Board has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! The camera plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver clear 8MP resolution image, or 1080p HD video recording at 30fps.